Sonochemically synthesized black phosphorus nanoparticles: a promising candidate for piezocatalytic antibacterial activity with enhanced dielectric properties.

The drawbacks inherent to traditional antibacterial therapies, coupled with the escalating prevalence of multi-drug resistant (MDR) microorganisms, have prompted the imperative need for novel antibacterial strategies. Accordingly, the emerging field of piezocatalysis in semiconductors harnesses mechanical stress to drive chemical reactions by utilizing piezo-generated free charge carriers, presenting a promising technology. To the best of our knowledge, this study is the first to provide a comprehensive overview of the eradication of pathogenic S. aureus bacteria using few-layer black phosphorus (SCBP) piezo catalyst under mechanical stimuli, along with the exploration of temperature dependent dielectric properties. The synthesis of the piezo catalysts involved a one-step cost-effective sonochemical method, and its structural, morphological, elemental, optical, and overall polarization properties were thoroughly characterized and compared with the traditional method-derived product (TABP). The synthesis-introduced defects, reduced crystalline diameters, modified bandgap (1.76 eV), nanoparticle aggregation, photoluminescence quenching, along with interfacial polarization, synergistically contribute to SCBP's exceptional dielectric response (4.596 × 107 @40 Hz), which in turn enhanced the piezocatalytic activity. When subjected to soft ultrasound stimulation at 15 kHz, the piezo catalyst SCBP demonstrated significant ROS-mediated antibacterial activity, resulting in a ∼94.7% mortality rate within 40 minutes. The impact of this study extends to cost-effective energy storage devices and advances in antibacterial therapy, opening new dimensions in both fields.

Third-order optical nonlinearity of the CuCo0.5Ti0.5O2 nanostructure under 120 fs laser irradiation.

Recently, titanium-based nanostructures with high nonlinear optical properties have found use in ultrafast photonic system applications. Here, we report a study of the third-order nonlinear optical property of the ${{\rm CuCo}_{0.5}}{{\rm Ti}_{0.5}}{{\rm O}_2}$CuCo0.5Ti0.5O2 (CCoTO) nanostructure synthesized via a simple chemical route. The 40-70 nm CCoTO nanoparticles with centrosymmetric crystalline structure show strong absorption in the 325-850 nm wavelength range due to the presence of different crystalline phases and surface vacancies. A Z-scan technique is used to study the electronic third-order nonlinearity of the synthesized nanoparticles, where a low-repetition-rate 120 fs laser source is employed to minimize thermal agitation-related nonlinearity. The CCoTO nanoparticles possess high surface defects due to oxygen- and copper-related vacancies, which are able to enhance the exciton oscillator strength resulting from the high value of third-order optical nonlinearity. The estimated values of nonlinear refractive index (${n_2}$n2) and nonlinear absorption coefficient ($\beta $ß) of the CCoTO are $ - {1.24}\; \times \;{{10}^{ - 15}}$-1.24×10-15 and ${3.79} \times {{10}^{ - 11}}$3.79×10-11, respectively, under ${188}\,\,{{\rm GW/cm}^2}$188GW/cm2 incident intensity. The intensity-dependent nonlinear optical property of the synthesized nanoparticles is also studied under different incident laser irradiation (62.7, 93, and ${188}\,\,{{\rm GW/cm}^2}$188GW/cm2). In the two-photon absorption (TPA)-dominated third-order nonlinear optical process, the values of ${n_2}$n2 and $\beta $ß of CCoTO are increased with intensifying the incident laser irradiation. The obtained high value of third-order optical nonlinearity of the synthesized nanostructure can be exploited in optical power limiters, pulse power reshaping, and optical switching applications.

Synthesis and Property of Copper-Impregnated α-MnO2 Semiconductor Quantum Dots.

Because of the superior optical and electrical properties, copper-impregnated size tuneable high-temperature stable manganese dioxide semiconductor quantum dots (SQDs) have been successfully synthesized by a modified chemical synthesis technique. Their size-dependent dielectric properties, semiconducting properties, and current-voltage ( I- V) characteristics have been investigated. X-ray diffraction pattern and Raman spectra confirmed that the required phase is present. Because of the different sintering temperature tuneable size of SQDs has been found and confirmed by high-resolution transmission electron microscopy. The band gap energy of the material is found to be 1.25-1.67 eV, measured from Tauc plot using UV-vis absorbance spectrum and their semiconducting properties have been confirmed by the non linear current-voltage ( I- V) behavior. Most intense green emission peak of photoluminescence (PL) spectroscopy confirms the oxygen vacancy defect state. The stoke shifting of Raman spectra, UV absorption, and PL emission are the footprint of quantum confinement effect. Incorporation of a little amount of Cu in tetragonal hollandite structure of α-MnO2 generates strain within that structure. This leads to create sufficient crystal defect state as well as rise in dielectric constant accompanied with low dielectric loss and higher ac conductivity. All these highly desirable properties make the SQDs a potential candidate for developing multifunctional photo-electronic devices. Owing to the tuneable band gap and electronic transport of the SQDs, we realized that the controllable size paves the way for designing SQDs possessing unique properties for optical and electronic device applications. Using this material as a high dielectric separator, a high-performance supercapacitor has been successfully fabricated which can light up 15 light-emitting diodes for 47 min 23 s after charging them only for 30 s.

Effect of Homeopathic Dilutions of Cuprum Arsenicosum on the Electrical Properties of Poly(Vinylidene Fluoride-Co-Hexafluoropropylene).

BACKGROUND: We report the effects of nanoparticles in homeopathic preparations of copper salts on the electrical properties of polymer film. Previous work showed that the incorporation of metal-derived homeopathic medicines increases the dielectric constant and alternating current (AC) conductivity of an electroactive polymer film that is commonly used as a capacitor in the electronic industry.We report here the effect of dilution of one homeopathic medicine, Cuprum arsenicosum (CuAs), at 200C potency on the electrical properties of the polymer film of poly(vinylidene fluoride-co-hexafluoropropylene). METHODS: CuAs 200c was incorporated in the film by the solution casting method. The electrical characteristics were measured at different frequencies using an inductance, capacitance, and resistance meter. Fourier transform infrared spectroscopy (FTIR) was performed to detect phase change in the polymer film due to the incorporation of CuAs. Morphology and particle size were studied using field emission scanning electron microscopy (FESEM) and energy dispersive X-ray (EDX) spectroscopy. RESULTS: At 10 kHz frequency, both dielectric constant and AC conductivity increased approximately 18 times for the polymer film when incorporated with 2 mL CuAs at 200C potency. FTIR indicated the increase in conducting phase, while FESEM and EDX confirmed the presence of spherical CuAs particles. CONCLUSION: The incorporation of CuAs in the electroactive polymer film enhances the conductivity and dielectric constant. We conclude that these changes arise from the change in phase of the polymer film, and because of the presence of two different metals that affects the interfacial polarization.

Effect of ultrahigh diluted homeopathic medicines on the electrical properties of PVDF-HFP

In an effort to improve the electrical properties of the electroactive Poly(vinylidene fluoridehexafluoropropylene) (PVdF-HFP), we introduced a novel and simple approach to synthesize PVDFHFP composite films by incorporating ultrahigh dilutions of two homeopathic medicines Ferrum metallicum (FM) and Zincum oxidatum (ZO) in different potencies. The homeo-PVDF-composite films (HPCF) were synthesized by simple solution casting technique. XRD, FESEM, FTIR studies were performed to check the presence of nanoparticles in the film. The electrical properties of the HPCF samples get enhanced significantly due to the incorporation of the medicines and the effect increases with the increase in potency of the medicines. (AU)

Effect of ultrahigh diluted homeopathic medicines on the electrical properties of PVDF-HFP

In an effort to improve the electrical properties of the electroactive Poly(vinylidene fluoride-hexafluoropropylene) (PVdF-HFP), we introduced a novel and simple approach to synthesize PVDFHFP composite films by incorporating ultrahigh dilutions of two homeopathic medicines Ferrum metallicum (FM) and Zincum oxidatum (ZO) in different potencies. The homeo-PVDF-composite films (HPCF) were synthesized by simple solution casting technique. XRD, FESEM, FTIR studies were performed to check the presence of nanoparticles in the film. The electrical properties of the HPCF samples get enhanced significantly due to the incorporation of the medicines and the effect increases with the increase in potency of the medicines.

Derivation of an empirical relation between the size of the nanoparticle and the potency of homeopathic medicines

Homeopathic medicines are often prescribed at very high dilutions and it is a clinically observed fact that the medicinal effect of the drug remains even at these high dilutions. The increase in potency of a medicine due to potentization is still debatable from physico-chemical point of view. Out of various hypotheses to explain this phenomenon, a recent hypothesis, advanced by us and supported by others, is that the size of the constituent particles decreases and eventually achieves nano dimension due to potentization. From the experiments performed by our group, the size of nanoparticles (NPs) of Cuprum metallicum, Zincum oxydatum, Aurum metallicum, Ferrum metallicum and Aconitum napellus (6cH, 30cH and 200cH) have been estimated. A general mathematical expression of the form y = a x-n has been derived which relates the size of NPs (y) with the corresponding potencies (x). There is no method to calculate the accurate potency of the homeopathic medicine, as the potency of a medicine depends to some extent on the method of preparation, for which a standardized procedure is warranted. Also, while handling a medicine, the solvent might evaporate causing a change in the potency. Thus by measuring the size of the NPs and using our proposed standard curve, the potency may be estimated...

Derivation of an empirical relation between the size of the nanoparticle and the potency of homeopathic medicines

Homeopathic medicines are often prescribed at very high dilutions and it is a clinically observed fact that the medicinal effect of the drug remains even at these high dilutions. The increase in potency of a medicine due to potentization is still debatable from physico-chemical point of view. Out of various hypotheses to explain this phenomenon, a recent hypothesis, advanced by us and supported by others, is that the size of the constituent particles decreases and eventually achieves nano dimension due to potentization. From the experiments performed by our group, the size of nanoparticles (NPs) of Cuprum metallicum, Zincum oxydatum, Aurum metallicum, Ferrum metallicum and Aconitum napellus (6cH, 30cH and 200cH) have been estimated. A general mathematical expression of the form y = a x-n has been derived which relates the size of NPs (y) with the corresponding potencies (x). There is no method to calculate the accurate potency of the homeopathic medicine, as the potency of a medicine depends to some extent on the method of preparation, for which a standardized procedure is warranted. Also, while handling a medicine, the solvent might evaporate causing a change in the potency. Thus by measuring the size of the NPs and using our proposed standard curve, the potency may be estimated. (AU)